Lincoln 2009 MKS Скачать руководство пользователя страница 165

Страница: 165 / 331

The Safety Canopy

威

is mounted to roof side-rail sheet metal, behind the

headliner, above each row of seats. In certain lateral collisions or rollover
events, the Safety Canopy

威

system will be activated, regardless of which

seats are occupied. The Safety Canopy

威

is designed to inflate between

the side window area and occupants to further enhance protection
provided in side impact collisions and rollover events.

The fact that the Safety Canopy

威

did not activate in a collision does not

mean that something is wrong with the system. Rather, it means the
forces were not of the type sufficient to cause activation. The Safety
Canopy

威

is designed to inflate in certain side impact collisions or rollover

events, not in rear impact, frontal or near-frontal collisions, unless the
collision causes sufficient lateral deceleration or rollover likelihood.

WARNING:

Several Safety Canopy

威

system components get hot

after inflation. Do not touch them after inflation.

WARNING:

If the Safety

Canopy

威

system has

deployed, the Safety Canopy

威

will

not function again unless replaced.
The Safety Canopy

威

system

(including the A, B, C, and D
pillar trim and headliner) must be
inspected and serviced by an
authorized dealer. If the Safety
Canopy

威

is not replaced, it will

not function again, which will
increase the risk of injury in a
future collision.

Determining if the system is operational

The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to the

Airbag readiness

section in the

Instrument Cluster

chapter. Routine maintenance of the

airbag is not required.

Any difficulty with the system is indicated by one or more of the
following:

•

The readiness airbag light (same light as for front airbag system) will
either flash or stay lit.

Seating and Safety Restraints

165

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Содержание 2009 MKS












































































































































































































































































































































Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды

Lincoln 2009 MKS, Руководство пользователя

Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды