Lincoln 2009 MKS Скачать руководство пользователя страница 89

Страница: 89 / 331

Autolock

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

1. To disable/enable the autolock
feature, select this function from the
SETUP menu for the current display
mode.

2. Press the RESET control to turn
the autolock ON or OFF.

Autounlock

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

1. To disable/enable the autounlock
feature, select this function from the
SETUP menu for the current display
mode.

2. Press the RESET control switch
to turn the autounlock ON or OFF.

Easy entry seat

This feature automatically moves the drivers seat backwards for easy exit
from the vehicle.

1. To disable/enable the easy entry
seat feature, select this function
from the SETUP menu for the
current display mode.

2. Press the RESET control to turn
the easy entry seat ON or OFF.

Reverse sensing system (rear park aid)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse
sensing system feature, select this
function from the SETUP menu or
put the vehicle in R (Reverse).

2. Press the RESET control to turn
the rear park aid OFF or ON.

Driver Controls

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Содержание 2009 MKS












































































































































































































































































































































Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды

Lincoln 2009 MKS, Руководство пользователя

Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды