Lincoln 2009 MKS Скачать руководство пользователя страница 21

Страница: 21 / 331

When the system has ejected the CD, the display will read REMOVE CD
#. If you do not remove the CD the system will reload the disc.

To auto eject all loaded discs–

Press and hold

. The system will eject

all discs and prompt you when to remove them.

SEEK:

Press

SEEK

to access the previous/next track.

CAT (Category) / FLD (Folder):

In MP3 mode only–

Press CAT/FOLD and then press

SEEK

access the previous/next folder.

SCAN:

Press for a brief sampling of all tracks on the current disc or

MP3

folder.

DIRECT:

In CD mode–

Press DIRECT. The display will read DIRECT TRACK

MODE SELECT TRACK. Enter the desired track number using the
memory preset buttons (0–9). The system will then begin playing that
track.

In MP3 folder mode–

Press DIRECT and the memory preset buttons

(0–9) of the desired folder. The system will advance to that specific
folder.

TEXT:

In MP3 mode only–

Press TEXT repeatedly to view Album (AL), Folder

(FL), Song (SO) and Artist (AR) in the display, if available.

In TEXT mode:

Sometimes the display requires additional text to be

displayed. When the < / > indicator is active, press TEXT and then
press

SEEK

to view the additional display text.

COMPRESSION:

Press MENU repeatedly until COMPRESSION ON/OFF

appears in the display. Use

SEEK

to toggle ON/OFF. When

COMPRESSION is ON, the system will bring the soft and loud CD
passages together for a more consistent listening level.

SHUFFLE:

Press SHUFFLE to toggle on/off and begin/stop random play.

The system will only shuffle the disc currently playing.

Satellite Radio

Satellite radio is available only with a valid SIRIUS radio
subscription. Check with your authorized dealer for availability.

SIRIUS:

Press repeatedly to access satellite radio mode, if equipped.

Press repeatedly to cycle through SAT1, SAT2 and SAT3 modes.

Entertainment Systems

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Содержание 2009 MKS












































































































































































































































































































































Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды

Lincoln 2009 MKS, Руководство пользователя

Результаты поиска

Содержание 2009 MKS

Отзывы:

Похожие инструкции для 2009 MKS

Бренды по названию

Популярные бренды