background image

THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES.  OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.

NOTE:  

All transmitters to be used on your vehicle

must be programmed/reprogrammed at the same
time.

Battery Saver

When the ignition is turned off, the vehicle will turn
off battery voltage to the interior lights after 45
minutes.

This will prevent draining of the battery if those
lights have been left on inadvertently or if a door is
not completely closed.  BatterV voltage to these

108

lamps will be restored when the outside front
door handles are lifted, the keyless entry keypad
is used, the remote entry transmitter is used, any
door is opened, the trunk is opened, or the
ignition key is turned to the ON position.

Anti-theft System

When armed, this system helps protect your
vehicle against break-ins or theft by monitoring
all doors, the hood, and the trunk lock cylinder.

When an unauthorized entry occurs, the system
triggers and will:

 flash the headlamps, parking lamps, interior

lamps, and alarm indicator light

 honk the horn

  prevent the engine from starting

Содержание 1996 Continental


































































































































































































































































































































Отзывы: