manualshive.com logo in svg

Lincoln 1996 Continental, Руководство пользователя, Страница: 58 / 321

Поделиться
Скачать
Lincoln 1996 Continental Скачать руководство пользователя страница 58

Engine Oil Pressure Warning Light

This light indicates the engine's oil pressure, not
the oil level.  However, if your engine's oil level
is low, it could affect the oil pressure.  The
light will come on briefly when you turn your
key to the START and ON position.  The light
should stay off when the engine is running with
normal oil pressure.  If the light comes on while
the engine is running, you have lost oil pressure
and continued operation will cause severe
engine damage.

54

If

 

you lose engine oil pressure:

1. Pull off the road as soon as safely possible.

2. Shut off the engine immediately or severe engine

damage could result.

3. Check the engine's oil level, following the

instructions on checking and adding engine oil,
see the 

Engine Oil 

in the Index.  If you do not

follow these instructions, you or others could be
injured.  To assure an accurate reading, your car
should be on level ground.

4. If the level is low, add only as much oil as

necessary before you start the engine again.  Do
not overfill.  Do not operate the engine if the light
is on, regardless of the oil level.  Contact your
nearest dealer for further service actions.

For more information about adding oil, see 

Adding

engine oil 

in the 

Servicing Your Vehicle 

chapter.

Содержание 1996 Continental


































































































































































































































































































































Отзывы:

Нет отзывов