manualshive.com logo in svg

Lincoln 1996 Continental, Руководство пользователя, Страница: 202 / 321

Поделиться
Скачать
Lincoln 1996 Continental Скачать руководство пользователя страница 202

Driving While You Tow

Be especially careful when driving while you tow a
trailer.  Never drive faster than 45 mph (70 km/h)
when you tow in hilly country on hot days.  Also,
anticipate stops so that you can brake gradually.

Towing a trailer increases the load on the engine and
transaxle, particularly in hilly country and with
heavier trailers.  Under these conditions you may
experience an excessive amount of shifting between
Overdrive and Third gears.  Moving the shift selector
to D (Overdrive Lockout) will keep this from
happening and will provide better engine braking.
When driving in less hilly country or with a lighter
trailer load. you may move the gearshift selector
lever to 

(Overdrive) without experiencing

excessive shifting.

198

When driving down steep hills, you should put
the gearshift selector lever in the I (First)
position to shift the transaxle into second gear.
This will provide additional engine braking.
The automatic transaxle will automatically
downshift to the proper gear for driving up a
grade.

If you use the speed control while you are
towing on very long, steep grades, the speed
control may shut off.

Servicing your vehicle if you tow

If you tow a trailer for a long distance, your
vehicle will need to be serviced more frequently
than usual. See

 

the 

Maintenance Schedule and

Record 

booklet.

Содержание 1996 Continental


































































































































































































































































































































Отзывы:

Нет отзывов