Lincoln 1996 Continental Скачать руководство пользователя страница 254

Страница: 254 / 321

Engine coolant drain and flush

Proper procedures for a complete coolant drain and
flush of the cooling system can be found in the

Car

Service Manual.

Following these recommended

procedures will ensure that the specified coolant
level and a 50/50

or appropriate mixture of coolant

and water is maintained.

Engine coolant refill procedure

When the entire cooling system is drained and
refilled, the following procedure should be used to
ensure a complete fill:

NOTE:

It is imperative the following procedure

be adhered to. Failure to do so could result in
damage to your engine.

Remove coolant reservoir pressure cap.

Remove the engine coolant outlet tube fill plug

on the engine.

With the engine off and cool, add a 50/50 mixture

of recommended cooling system fluid and water
to the coolant outlet tube fill neck until the
reservoir is full.

NOTE:

DO NOT FILL COOLANT SYSTEM

THROUGH COOLANT RESERVOIR. COOLANT
WILL NOT ENTER ENGINE, WHICH CAN
LEAD TO ENGINE DAMAGE.

NOTE:

Avoid spilling coolant on the front end

accessory drive belt, as this will allow the belt to slip
and become noisy.

Reinstall the pressure cap to the coolant

reservoir.

Continue filling at the engine coolant tube fill

neck slowly while allowing air to escape.

Reinstall the engine coolant tube fill plug when

the system is full.

251

Содержание 1996 Continental


































































































































































































































































































































Результаты поиска

Содержание 1996 Continental

Отзывы:

Lincoln 1996 Continental, Руководство пользователя, Страница: 254 / 321

Результаты поиска

Содержание 1996 Continental

Отзывы: