6. Adjust the Shorting Control Parameters (Optional)
The shorting control parameters can be adjusted to define how the welding machine will respond
when the arc shorts to the weld puddle.
To view the shorting control window, click on the button on the Waveform Editor screen.
Adjust the shorting control parameters to accommodate your welding application and per the
following parameter descriptions.
Appendix A
A-11
PULSE WAVE SHAPING PRINCIPLES
WAVE DESIGNER
AMPS
VOLTS
ARC
REESTABLISH
VOLTS
SHORT
DETECT
VOLTS
PINCH CURRENT
RISE PLATE
27850036
Shorting Control
Shorting Control
5
55.18
15
For Wire Feed Speed
Short Detect Volt
Pinch Current Rise Rate
Arc Restablish Volt
50
Short detect voltage: Adjust this parameter to set the detect voltage level that will start the
shorting response.
Pinch current rise rate (shorting response): Adjust this parameter to set the current rise rate that
will be used to clear a short.
Arc reestablish volts: Adjust this parameter to set the detect voltage level that will end the
shorting response.
Содержание WAVE DESIGNER
