Lincoln Electric WAVE DESIGNER, Руководство оператора

Страница: 14 / 74

3.2 WORKING IN
WAVE DESIGNER
3.2.1 WAVEFORM EDITOR WINDOW
Refer to the Waveform Editor window in Figure 3-2 and the related usage instructions.
FIGURE 3-2. WAVEFORM EDITOR WINDOW.
3-2 Section 3
SOFTWARE OPERATION
WAVE DESIGNER
Pulse Waveform Editor
Wire Feed Speed
Ramp Up Rate
Peak Amps
Peak Time ms
Tailout Time
Tailout Speed
Stepoff Amps
Backgrd Amps
Backgrd Time
Frequency
Ramp Overshoot %
26.4
33.4
21
40
.100
3.0
1.2
250
-20
600
Edit
Start
About
Adapt Short End
Wave Designer Pro Off Line - pulse.swf
700
600
500
400
300
200
100
0
0 3 6 9 12 15 18 21 24 27 30
File Tools Print Help
50
Off Line Stand by
Status
AC.sco loaded
Adaptive
1
2
5
3
6
7
4
27850006
1. Tool Bar Tool bar menus access alternate windows, open and save files, etc. Detailed
instructions are provided in paragraph 3.2.2.
2. Workpoint Selector/Editor The workpoint selector includes a pulldown window for
selecting a workpoint and an edit window for changing the listing of workpoint values. For
the Pulse Waveform Editor, the workpoints are wire feed speeds. The workpoint parameter
(peak voltage, current, etc.) varies with the welding mode (pulse, STT, etc.). Refer to
paragraph 3.2.3 for more detail on selecting and editing workpoints.
3. Variable Parameters The listing of variable parameters display the active parameter
values for the selected WFS. The parameter values are changed (edited) with the related
arrows and slide bars or by moving parameter nodes in the waveform graphic editor. See
paragraph 3.2.4 for more details on editing variable parameters and the wave shape.
4. Graphic Editor The graphic editor displays the active wave shape. The wave shape
changes when the parameter values are changed. The displayed wave parameter nodes
(boxes) can be selected with your mouse to edit the variable parameters. Pressing the
<F1> key will also toggle from one selected node to another. See paragraph 3.2.4 for more
details on editing variable parameters and the wave shape.