Lincoln Electric VRTEX ENGAGE, Руководство оператора

Страница: 32 / 57

B-16
OPERATION (USER MODE) VRTEX® ENGAGE™
TECHNIQUE PARAMETERS
The upper left area of the screen shows the technique parameters
being tracked and the graph of these parameters is located to the
right. See Figure B.41. When the user welds, each parameter
is graphed using a line that is of the same color as the technique
parameter box. For example, “position” is written in the blue box
and indicated by the blue line. The left side of the graph represents
the left side of the coupon and the right side represents the right side
of the coupon. For vertical welds, the graph is rotated so that it is
vertical, with the bottom representing the bottom of the coupon and
the top representing the top of the coupon. The graph also shows
how close the parameter was to the ideal value. The ideal value
is indicated by the red line located in the center of the graph. This
value is determined by the tolerance editor settings. The upper and
lower white lines represent the acceptable maximum and minimum
values that the parameter should be within. These values are also
determined by the tolerance editor setting. Anything above the
top white line or below the bottom white line is out of tolerance.
The closer the user is to the ideal line, the better the weld. Each
parameter can be toggled on or off of the graph by touching the
appropriate icon.
WELD
TECHNIQUE
GRAPH
DISCONTINUITY
INDICATOR
Figure B.41 – LASER screen (graph, defects, discontinuities, etc.)