Lincoln Electric VRTEX ENGAGE, Руководство оператора

Страница: 23 / 57

B-7
OPERATION (INSTRUCTOR MODE) VRTEX® ENGAGE™
TOLERANCES: JOINT CONFIGURATION SELECTION
SCREEN
The user selects which configuration to modify. See Figure B.14.
TOLERANCES: PROCESS SELECTION SCREEN
The user selects which process to modify. See Figure B.15.
TOLERANCES: EQUIPMENT SETTINGS SCREEN
This screen allows for the modification of the following welding
parameters (See Figure B.16):
• Wire Feed Speed • Voltage
• Amperage • Polarity
TOLERANCES: GAS SCREEN
This screen allows for the modification of (See Figure B.17):
• Gas Mixture Selected
• Gas Flow Rate
TOLERANCES: WELDING TECHNIQUE PARAMETERS
SCREEN
This screen allows the modification of (See Figure B.18):
• CTWD/Arc Length
• Work Angle
• Travel Angle
NOTE: The travel angle for drag welding techniques should always be
less than 90 degrees. The travel angle for pushing technique
should always be greater than 90 degrees.
Figure B.14 – Joint configuration screen
Figure B.15 – Process selection screen
Figure B.16 – Equipment settings screen
Figure B.17 – Gas screen
Figure B.18 – Welding technique parameters screen