Section 5: Torch Consumables and Cutting Charts
Spirit II User’s Manual
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
5-4
YES
NO!
6. Use the swirl ring removal tool (P/N BK260105) to remove the swirl ring from
the nozzle.
7. Remove the electrode from the torch head using the appropriate tool:
•
All copper electrodes use socket P/N BK277087 & driver P/N BK277086.
•
All silver electrodes use P/N BK279061.
8. Inspect all consumables and o-rings for damage and excess wear. Replace
with new consumables as necessary.
9. Inspect the cooling tube in the torch head for damage. See Section 6
Maintenance and Troubleshooting if replacement is necessary.
PULL
PULL
OR
