Lincoln Electric Prism 4, Руководство оператора

Страница: 43 / 80

D-1
MAINTENANCE
MAINTENANCE
Have qualified personnel do the maintenance work. Turn
the power off before working inside the machine. In
some cases, it may be necessary to remove safety
guards to perform required maintenance. Remove
guards only when necessary and replace them when the
maintenance requiring their removal is complete. Always
use the greatest care when working near moving parts.
If a problem cannot be corrected by following the
instructions, contact your local Lincoln Electric repre-
sentative for service options or contact Lincoln Electric
Customer Service.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or
electrode with skin or wet clothing.
• Insulate yourself from work and ground.
• Always wear dry insulating gloves
FUMES and GASES can be dangerous.
• Use in open, well ventilated areas or
vent exhaust outside.
MOVING PARTS can injure.
• Do not operate with doors open or
guards off.
•
Stop before servicing.
• Keep away from moving parts.
Dismantling and disposal
• Only a qualified electrician may disconnect the machine
or the electrical system
• Before dismantling it the machine must be
disconnected from the power supply and from the
external compressed air supply
• Before dismantling it, clean the equipment
• The dismantling area must be cleaned afterwards
• During dismantling work, the working area must be
adequately ventilated; this can be achieved by provision
of a mobile ventilation unit
• During dismantling work, wear appropriate personal
protective equipment. We recommend half-face
breathing masks to DIN EN 141/143, protection class P3
• The pollutants and dust, together with the dirty filter
cartridges, must be properly disposed of in a
professional manner in accordance with statutory
instructions, using the plastic sack disposal system
supplied
Maintenance should only be performed by
authorized qualified and trained persons
(skilled) using appropriate work practices.
When cleaning equipment or replacing
filter use personal protection equipment
(PPE) such as gloves, respirators and
protective clothing to protect against
overexposure to particulate. It is
recommended that a vacuum cleaner or
wet methods be used to clean up any
loose particulate that is present in the
extraction arm. It is necessary to use a
vacuum cleaner with HEPA rated
filtration.
• Observe the maintenance intervals given in this manual.
Overdue maintenance can lead to high costs for repair
and revisions and can render the guarantee null and
void.
• During service, maintenance and repair jobs, always
use Personal Protective Equipment (PPE) to avoid
injury. This also applies to persons who enter the work
area during installation.
• Always use tools, materials, lubricants and service
techniques which have been approved by the
manufacturer. Never use worn tools and do not leave
any tools in or on the product.
• Safety features which have been removed for service,
maintenance or repairs, must be put back immediately
after finishing these jobs and it must be checked that
they still function properly.
• Use sufficient climbing gear and safety guards when
working on a higher level than 6 feet.
• Ensure the workspace is well illuminated.
MALFUNCTIONS AND EMERGENCIES EFFECTING
THE FILTER UNIT
Fire
• In the event of fire, an approved extinguisher for fire classes A, B
and C should be used
•
The manufacturer must be contacted.
ESCAPE OF NOXIOUS SUBSTANCES OR RADIATION
• The Prism contains no noxious substances.
•
If the filter ruptures, welding fumes can be released into the
building; welding activities must be suspended and the
Prism repaired.
WARNING
WARNING
ATTENTION
WARNING
WARNING
PRISM ®
®
®