Lincoln Electric K2803, Руководство оператора

Страница: 34 / 34

English English 31
Suggested Accessories
BASIC PACKAGE
Item number
Description
K2803-1 Power Wave
(R)
AC/DC 1000 SD CE
K2370-2 MAXsa
TM
22 Wire Drive
K2814-1 MAXsa
TM
10 Controller/User interface
K2683-XX Control Cable (5 pin- 5pin) – power source to controller
K1785-xx Control Cable (14 pin- 14pin) – Controller to Wire Drive
OPTIONAL KITS
K1785-xx Control Cable (14 pin- 14pin) – for paralleling/multiple arc applications
K2312-2 MAXsa 29 Wire Drive (for Fixture builders)
K2311-1 Motor Conversion Kit (to convert existing NA-3/NA-4/NA-5 wire feeder gear boxes)
K2444-1 CE, C-Tick Filter Kit
K2626-2 MAXsa™ 19 Controller (for fixture builders that do not require the MAXsa 10 Controller)
Options and Accessories are available at
www.lincolnelectric.com
Follow these steps:
1. Go to www.lincolnelectric.com
2. In the Serach field type E9.181 and click on the Search icon (or hit “Enter” on the keyboard)
3. On the results page, scroll down to the Equipment list and click on E9.181.
All of the information for the PowerWave System accessories ca be found in this document.
Software Tools
Power Wave ® AC/DC 1000 ® SD software tools and other documents related to the integration, configuration, and
operation of the system is available at www.powerwavesoftware.com . Power Wave ® Submerged Arc Utilities includes
the following items and all of the documentation to support them.
Name Purpose
Weld Manager
Setup Ethernet address information, and apply security settings.
Utility to diagnose Power Wave® problems, read system information, calibrate output
voltage and current, test sense leads, and diagnose feed head issues. Can also setup
and verify DeviceNet operation.

Gear Box / Feeder Selection

Memory Lables

DeviceNet setup and Verification

UI setup (Lockout and Limits)

Ethernet setup and Verification

Diagnostic
-snapshot
-weldview
-error lookup
-inductance test
-sense lead test

Calibration (I,V,WFS)

Cable Test
-inductance
-sense leads
Command Center AC/DC system tool to observe and log welding operation, verify DeviceNet welding
configuration, and facilitate quality analysis.
Submerged Arc Cell
Configuration Used to configure and verify a multi-arc or parallel connected power source (more
than one Power Wave
®
per arc) systems.

Multi Arc setup

Generators Command Center connection file

Setup Verification
-output cables (cables crossed)
-software versions (Master to slave and Arc to Arc)
-I/O verification (Master to Master and Master to slave)
-sense lead
-inductance test