Lincoln Electric FLEXCUT 125 CE, Инструкция по технике безопасности, эксплуатации и обслуживанию

Страница: 15 / 44

8695 4496 / B
C - DESCRIPTION
FLEXCUT 125 CE INSTALLATION
C-11
4 - TOOL HOLDER AND TORCH IMPACT SAFETY
The functions of the tool holder are as follows:
- Management of the Z axis (vertical axis)
- Torch holding to prevent vibrations
The functions of the torch impact safety system are as follows:
- Indication of mechanical impacts on the torch
- Protection of the torch during mechanical impacts
The tool holder is usually mounted on the tool holder carriage (mobile part).
Space taken up by the equipment :
Please refer to the document: 8695 4566
5 - TORCH BUNDLE
The
Flexcut 125 CE
installation is designed to operate with the
LC125M
torch
The function of the torch is to diffuse gas and current so as to achieve high quality cutting
The torch is connected to the power source via its bundle. It is fixed to the machine via the torch impact safety
system of the tool holder.
The torch is cooled by cutting air.
Space taken up by the equipment :
Please refer to the document: IM10375
6 - POWER SOURCE
The function of
Flexcut 125 CE
power source is to regulate the cutting current according to the required setpoints
The
Flexcut 125 CE
can deliver a maximum of 125A.
The power source is generally located close to the installation.
Space taken up by the equipment :
Please refer to the document: IM10375.