Lincoln Electric DUAL VANTAGE 700, Руководство оператора

Страница: 29 / 96

AUXILIARY POWER OPERATION
Start the engine and set the IDLER control switch to
the desired operating mode. Full power is available
regardless of the welding control settings, if no weld-
ing current is being drawn.
SIMULTANEOUS WELDING AND AUXIL-
IARY POWER LOADS
It must be noted that the above auxiliary power ratings
are with no welding load.
Simultaneous welding and power loads are specified
in table B.5.
TABLE B.6 DUAL VANTAGE
®
700 Extension Cord Length Recommendations
(Use the shortest length extension cord possible sized per the following table.)
TABLE B.5 DUAL VANTAGE
®
700 SIMULTANEOUS WELDING AND POWER LOADS
B-10
OPERATION DUAL VANTAGE ® 700
Maximum Allowable Cord Length in m (ft.) for Conductor Size
Conductor size is based on maximum 2.0% voltage drop.
2.5
2
mm 14AWG 4.0
2
mm 12AWG 6.0
2
mm 10AWG 10.0
2
mm 8AWG 16.0
2
mm 6AWG 25.0
2
mm 4AWG
Load
(Watts)
3,600
Current
(Amps)
15
Voltage
(Volts)
240 18 (60) 23 (75) 46 (150) 69 (225) 107 (350) 183 (600)
WELD
AMPS
0
100
200
300
400
500
600
1 PHASE
WATTS AMPS
7,200 30
7,200 30
7,200 30
7,200 30
7,200 30
6,400 26
0 0
3 PHASE
WATTS AMPS
20,000 28
20,000 28
20,000 28
16,800 23
12,000 16
6,400 9
0 0
BOTH 1 AND 3 PHASE
WATTS AMPS
------ 28
------ 28
------ 28
------ 23
7,200 ------
6,400 ------
0 ------
PLUS
OR
OR