Lincoln Electric DUAL VANTAGE 700 Скачать руководство пользователя

Страница: 20 / 96

SAFETY PRECAUTIONS

Read and understand this entire section before

operating your DUAL VANTAGE

700.

• Do not attempt to use this equipment until you

have thoroughly read the engine manufacturer’s

manual supplied with your welder. It

includes important safety precautions,

detailed engine starting, operating and

maintenance instructions, and parts

lists.

---------------------------------------------------------

---------------

ELECTRIC SHOCK can kill.

• Do not touch electrically live parts or electrode

with skin or wet clothing.

• Insulate yourself from work and ground

• Always wear dry insulating gloves.

-----------------------------------------------------------

---------------

ENGINE EXHAUST can kill.

• Use in open, well ventilated areas or

vent exhaust outside

• Do not stack anything near the engine.

------------------------------------------------------------------------

MOVING PARTS can injure.

• Do not operate with doors open or guards off.

• Stop engine before servicing.

• Keep away from moving parts

--------------------------------------------------------------------------

• Only qualified personnel should operate this

equipment.

• Always operate the welder with the sliding door

closed and the side panels in place as these pro-

vide maximum protection from moving parts and

insure proper cooling air flow.

--------------------------------------------------------------------------

GENERAL DESCRIPTION

The DUAL VANTAGE

700 is a dual-operator

multi-purpose diesel engine-driven welding power

source. The machine uses a brush type alternating cur-

rent generator for DC multi-purpose welding, for 240

VAC single phase. The DC welding control system uses

state of the art Chopper Technology for superior

welding performance.

WARNING

The DUAL VANTAGE

700 is fitted with a selectable

VRD(Voltage Reduction Device). The VRD operates

in the CC-Stick mode reducing the OCV to <13 volts,

increasing operator safety when welding is per-

formed in environments with increased hazard of

electric shock such as wet areas and hot, humid

sweaty conditions.

FOR AUXILIARY POWER:

Start the engine and set the IDLER control switch to

the desired operating mode. Full power is available

regardless of the welding control settings providing no

welding current is being drawn.

ENGINE OPERATION

Before Starting the Engine:

• Be sure the machine is on a level surface.

• Open side engine door and remove the engine oil

dipstick and wipe it with a clean cloth. Reinsert the

dipstick and check the level on the dipstick.

• Add oil (if necessary) to bring the level up to the full

mark. Do not overfill. Close engine door.

• Check radiator for proper coolant level. (Fill if nec-

essary).

• See Engine Owner’s Manual for specific oil and

coolant recommendations.

B-1

OPERATION

DUAL VANTAGE

700

OPERATION

Содержание DUAL VANTAGE 700

































































































Результаты поиска

Содержание DUAL VANTAGE 700

Отзывы:

Похожие инструкции для DUAL VANTAGE 700

Бренды по названию

Популярные бренды

Lincoln Electric DUAL VANTAGE 700, Руководство оператора

Результаты поиска

Содержание DUAL VANTAGE 700

Отзывы:

Похожие инструкции для DUAL VANTAGE 700

Бренды по названию

Популярные бренды