LINCHR H Series, Руководство пользователя

Страница: 77 / 90

75
12.4.2 2 chargers Networking (WiFi connection)
When conduct networking of 2 chargers through WiFi (routers must be equipped), turn on the load
balancing function on the APP for both of them, set the master charger and slave charger modes (1 master and
1 slave), and in the load balancing interface, set the "Networking Configuration" as WiFi. In the APP load
balancing interface, input the same WiFi name and WiFi password for the 2 chargers, and wait for 3min. If the
APP interface does not prompt the networking failure, it means that networking of the 2 chargers is
successfully.
12.4.3 Multiple chargers Networking
When conduct networking of multiple chargers through WiFi or using network cable (router must be
equipped, and in case of networking with network cable, it can also be equipped with switchboard). Turn on
the load balancing function on APP for all of the chargers, set master charger and slave charger modes (1
master and multiple slaves), and in the load balancing interface, set "Networking Configuration", both of WiFi
or Ethernet are allowed. When setting WiFi, WiFi name and WiFi password must be the same. When setting
Ethernet, ensure that in the same network segment, there are different IP addresses, and wait for 3min. If the
APP interface does not prompt networking failure, it means that networking of the chargers is successfully.