Lincat OG7502, Инструкция пользователя по установке, обслуживанию и модификации

Страница: 15 / 22

IS468 ECN3639
13
COMPONENT REPLACEMENT (cont.)
Ignitor Electrode

Remove the Stainless & Mild Steel covers secured by 4 & 7 screws respectively.

Disconnect wire from electrode.

Undo electrode from pilot assembly using a 10mm spanner.

Re-assemble in reverse order.
Thermostat

Working in the oven chamber remove the oven furniture and disconnect the
thermostat phial from its holder.

In the lower chamber undo the 2 screws securing the hinged drop-down panel.

Undo the 2 screws securing the thermostat to its bracket.

Disconnect the wires (noting their position).

Remove the upper back panel secured with 12 screws.

Withdraw the phial through its gland.

Re-assemble in reverse order.

Ensure that the thermostat phial is not kinked
– has no sharp bends and is
correctly located in its holder.
Safety Thermostat

Working in the oven chamber remove the oven furniture and disconnect the
thermostat phial from its clip (taking note of its position).

Working from the rear of the appliance remove both back panels.

Undo the 2 screws securing the thermostat bracket to the cabinet.

Undo the 2 screws securing the thermostat to the bracket.

Disconnect the wires (noting their position).

Withdraw the phial through its gland.

Re-assemble in reverse order.

Ensure that the thermostat phial is not kinked
– has no sharp bends and is
correctly located in its holder.
Piezo Ignitor

In the lower chamber, undo the front 2 screws securing the lower hinged drop-
down panel.

Disconnect the ignitor lead.

Undo locknut and remove piezo ignitor.

Re-assemble in reverse order.
Float Valve

Remove both back panels.

Lift off the reservoir cover plate (secured by a single screw) and the inner cover.

Disconnect the water hose.

Undo the outer fixing nut and lift away, together with the ball float.

Re-assemble in reverse order.