background image

IS468 ECN3639 

 

CONTENTS

 

 

Contents   

 

 

 

 

 

    Page 

 

Customer Information……………………………………………………….  2 
Warnings and Precautions…………………………………………………  3 
Technical Data………………………………………………………………..  4 
Commissioning……………………………………………………………….  5 
Check List of Enclosures…………………………………………………..  5 
Installation…………………………………………………….………………  6-7 
Conversion of Gas Types…………………………………………………..  7 
User……………………………………………………………………………..  8-10 

 

Servicing 

……………………………………………………………………… 11 

 

Component Replacement ………………………………………….….…... 12-14

 

Spare Par

ts List……………………………………………………….……... 15 

Fault Finding………………………………………………………………..... 16-18 
Service information…………………………………………………………. 19 
Guarantee………………………………………………………….……….… 19

 

 
 

WARNINGS AND PRECAUTIONS

 

 
It  is  mandatory  that  all  appliances  are  installed,  commissioned  and  serviced  by  a 
qualified and competent person as defined by the regulations in force in the country 
of installation. 
 
Failure to comply will invalidate the warranty. 
 

WARNING! 

This appliance must be installed by a competent installation engineer in accordance with 
the installation instructions, and should conform to the following requirements: 
 
Do not obstruct or block the appliance flue. 
 
Installation must include sufficient ventilation to prevent the occurrence of unacceptable 
concentrations of substances harmful to health in the room in which they are installed. 
 
It is recommended that this appliance is sited under an extraction canopy for the removal of 
combustion products 
 
After operation, some parts of the appliance will remain hot for a period of time. Please take 
care to avoid accidental burns. 
 
This appliance is for professional use only and must only be used by qualified people. 
 

CAUTION!

 

All equipment must be earthed to prevent shock. 
 
Do not connect directly to any flue, ducting or mechanical extraction system. 
 
Installation should allow for a sufficient flow of fresh air for gas combustion. 
 
Parts which have been protected by the manufacturer or his agent must not be adjusted by 
the installer or user. 

 

Содержание OG7502























Отзывы: