Linak DB14, Руководство пользователя

Страница: 14 / 42

Page 14 of 42
Description of the DESKLINE
®
system
Each DESKLINE
®
actuator/column is equipped with a motor and parallel/memory drive is ensured by means of software in the
CBD6S (SMPS) that also takes account of an oblique load on the desk. Soft start and stop are also part of this software, which
ensures a soft start and stop when adjusting the desk.
Application of the DESKLINE
®
system:
Irrespective of the load, the duty cycle 10% ~ 1 minute continuous use at full load, followed by 9 minutes pause
stated in the data sheets, must NOT be exceeded as this will result in a superheating of the motor and the control box.
Exceeding the duty cycle will result in a dramatic reduction of the life of the system.
The DB/DL system range contains following products:
• 1 control box CBD6S 200 W or CBD6S 300 W (SMPS - Switch Mode Power Supply)
• DL12, DL14, DL14 PLUS
TM , DB14 or DL17 (1 - 4)
• 1 exchangeable mains cable
• Motor cables (1 - 4)
• DP1U/DPF1M/DPG1M/DPG1B (if memory function is required)
DP1C/DPT/DPF1C/DPG1C (if memory function and display is required) or
DPA/DPB/DPH/DP1K/DP1V/DPF1K/DPG1K (if only up/down is required) or DPF1D (if display is required).