LIMIT LIDDT217, Инструкция по эксплуатации

Страница: 8 / 36

What to do if…
Defrosting in storage
compartment
frozen food
Defrosting in the freezer chamber is
operated manually. Before defrosting, take
the food out.
Take the ice tray and drawers out or put
them into the fresh food compartment
temporarily.
Set the knob of the temperature regulator
to the “0”( where the compressor will stop
working) and leave the door of the
refrigerator open until ice and frost
dissolve thoroughly and
at the
bottom of the freezer chamber. Wipe
the water with a soft cloth.
In
up the process of
defrosting, you may put a bowl of warm
water (about 50°C) into the freezer
chamber, and scrape away the ice and
frost with a defrosting spatula. After doing
so, be sure to set the knob of the
temperature regulator to the original
position.
It is not advisable to heat the freezer
chamber directly with hot water or a hair
dryer while defrosting
to avoid
deformation of the inner case.
It is also not advisable to scrape off ice
accumulate
out
order to speed
in order
Warning! off the appliance before
defrosting, turn the temperature regulator to
the “0”
.
Important! The should be
defrosted at least month. During
, if the door opened
frequently or the appliance in
extreme humidity, we advise the user to
defrost every two weeks.
To switch
position
refrigerator
once a its
usage has been
has been used
No usage for extended periods of time
Remove all refrigerated packages.
Switch off the appliance by turning the
temperature regulator to the “0”
.
Remove the main plug,switch off, or
disconnect the
supply.
Clean thoroughly (see section: Cleaning
and Care)
Leave the door open to avoid the build up
of odors.
Note: the appliance contains a
freezer compartment.
position
electrical
Only if
Warning! Before trouble shooting,
disconnect the power supply. Only a
qualified electrician
person must carry out the
trouble shooting that is not in the
manual.
or other
authorized
Important! There are some sounds during
nor mal use( com pr es s or, r e f ri g era n t
circulation)
Important!
Repairs to refrigerators/freezers may only
be performed by competent service
engineers. Improper repairs can give rise to
significant hazards for the user. If your
appliance needs repairing, please contact
your specialist dealer or your local
Center. Customer Service
and frost or separate foods from the containers
which have been congealed.Together with the
food with sharp tools or wooden bars, so as
not to damage the inner casing or the surface
of the evaporator.
Problem Possible cause Solution
Appliance does not
work.
Appliance cools too
much.
Appliance is not switched on.
Main plug is not plugged in or
is loose.
Fuse has blown or is defective.
Outlet is defective.
Temperature is set too cold.
Switch on the appliance.
Plug the appliance into the
electrical socket.
Check fuse, replace if necessary.
Defective parts need
repaired
to be
by an electrician.
Turn the temperature regulator to
a warmer setting temporarily.
8