LIMIT LIDDT217, Инструкция по эксплуатации

Страница: 4 / 36

Control panel
Starting up and temperature regulation
The temperature selector knob is located
on the top of the refrigerator compartment.
Setting “0” means
Off.
to turn on the
appliance.
Setting “1” means
Highest temperature, warmest setting.
Setting “7” (end-stop) means
Lowest temperature, coldest setting.
Rotate the knob clockwise
Important! Normally, we advise you select a
setting of 2, or 3 or 4, if you want the
temperature higher or lower, please turn the
knob to a warmer or colder setting
accordingly. When you turn the knob to
this can lead to more energy
efficiency.
Important! High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even nonstop!
Reason: when the ambient temperature is
high, the compressor must run continuously
to maintain a low temperature in the
appliance.
a
lower setting,
Otherwise, a higher setting will
lead in more energy consumption.
First use and installation
Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product, then
dry thoroughly.
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
Installation Positioning
Warning! Before installing, read the
instructions carefully for your safety
and the correct operation of the appliance.
Position the appliance away from sources
of heat such as stoves, radiators, direct
sunlight, etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
ventilation, follow the instructions relevant
to the installation.
Wherever possible, the back of the
product should be against a wall to avoid
touching or catching warm parts
(compressor, condenser), and to prevent
the risk of fire, follow the instructions
relevant to installation.
The appliance must not be located close
to radiators or
Make sure that the main plug is accessible
after installation of the appliance.
cooking appliances.
Any electrical work required to do the
servicing of the appliance should be
carried out by qualified electrician or
person.
This product must be serviced by an
authorized Service Center, and only
genuine spare parts must be used.
authorized
Service
2) If the appliance contains a freezer compartment.
1) If the appliance is Frost Free.
4