Limbic Media Aurora SE, Руководство пользователя

Страница: 8 / 32

8
PREPARE FOR AN INSTALLATION
It is important to plan your lighting configuration before installing Aurora
SE. Ensure all fixtures are accounted for prior to installing. Connecting and
testing configurations in an accessible area prior to final installation is highly
recommended.
Included Components
• Aurora SE
• 120VAC to 19VDC Power adapter
• Aurora SE Quick Start Guide
Power Aurora SE ON/OFF
Required Components
• Aurora SE
• 120 VAC to 19 VDC Power adapter
Method
1. Connect the included 19 VDC power supply to Aurora SE’s Power Connector
2. Plug the 19 VDC power supply into a 120 VAC power source
3. Wait 60s for Aurora SE to power ON
4. Disconnect the 19 VDC power supply from AC power to power Aurora SE OFF
NDB Basics
NDBs (Network Distribution Boxes) allow Aurora SE to control LED pixels. Most
Aurora SE Installations will primarily use NDBs to drive their LED pixels, so
understanding how they work is an important first step to setting up your Aurora SE
installation.
NDBs accept lighting data from Aurora, and power from a 12VDC or 24VDC power
supply. They distribute power and data across their 16 ports in order to provide
power and a control signal to each LED pixel strand. NDBs can be used with or
without power top ups or smart Ts to achieve a variety of configurations that can be
tailored to any environment.
Caution:
Do not connect LED pixels while the NDB is connected to power.