Chapter 6-3-2. VGA V/H SYNC
VGA V/H ADJUST allows adjusting PDR-2160’s video output vertically and/or horizontally for
the VGA output. A user can use this feature to adjust video to fit a LCD monitor.
Chapter 6-3-3. Main Monitor Alert
Main monitor alert feature allows switching to the camera’s full screen display when the
corresponding alarm switch or motion is triggered, it will then switch back to the 16-channel
split display mode after the dwell.
Chapter 6-3-4. Spot Monitor
There are four spot monitors (PDR-2160A only) which has the features of (1) calling a camera’s
full screen display controlled by keyboard(s), (2) alerted camera full screen switching, and (3)
full camera sequential display. To edit above features, please first press Left or Right button to
choose the spot monitor.
Chapter 6-3-5. Alerted Camera
To enable Alerted Camera in full screen switching, set this option to enable. This spot monitor
specified above will switch to correspondent camera view when its alarm/motion gets triggered.
Chapter 6-3-6. Enable Sequence
To set one of the spot monitor to full screen sequential display, set this option to enable.
Chapter 6-3-7. Caption Enable
Caption enable feature enables or disables the camera name displayed on a spot output.
Chapter 6-3-8. Set Spot Sequence
Each spot monitor output can be configured in displaying camera’s full screen in sequence. To
disable this feature, please set the time to zero. To enable, please assign display dwell to the
camera.
PDR-2160 Instruction Manual
28
