Chapter 4. Playback
To playback, please press Play button on remote controller or keypad. A Play message box
with four different ways shows up for searching video clips. Playback message box contains
time search, event search, REC search, and play entire HDD. These features are described in
the following sections:
PLAY
↵
SET
←→
SELECT
↑↓
MOVE ESC EXIT
TIME SEARCH (M+S)
PLAY HDD : MASTER
EVENT SEARCH
RECORD SEARCH
PALY ENTIRE HDD
Chapter 4-1. Time Search (M+S)
Time search ( slave) feature can perform date and time search for recorded video.
This feature is very easy-to-use, and it allows a user to perform video searching task
throughout two hard disk drives. The stored video clips are shown in red in the date/time bar.
Yellow blocks indicate that there is no video clip stored. On the other hand, the red blocks
indicate that there are video clips exist.
TIME SEARCH
←→
MOVE
↑↓
DATE/TIME
↵
SET ESC EXIT
2006/02/17 17:51 MINUTE INPUT
0 20
40 59
RECORDED START 02/17 17:51
EMPTY STOP
02/17
18:00
•
To perform the searching, simply press Left or Right button and move the cursor
above the red block at desired date and time specified.
•
Press Enter to choose the date and time information
•
Press Up or Down to select year, month, date, hour, and minute.
PDR-2160 Instruction Manual
19
