Chapter 6-2-5. Sequence
Sequence feature can multiplex each camera screen in full screen size in specific time period.
Once the sequence table is set, press SEQ button on the remote controller to activate the
sequence feature. To disable sequence feature, press SEQ button again.
①
Press Left or Right button to adjust
the time period.
②
Press Up or Down button to move
to the next camera sequence
setting.
③
Press ESC to exit the setup.
④
Press SEQ button to enable
sequence feature.
SEQUENCE
↵
SET
←→
SELECT
↑↓
MOVE ESC EXIT
: 02 SEC
06
: 02 SEC
07
: 02 SEC
08
: 02 SEC
09
: 02 SEC
10
: 02 SEC
11
: 02 SEC
12
: 02 SEC
04
: 02 SEC
05
Chapter 6-2-6. Boarder Color
Boarder color refers to the boarder of each split display’s color. This color can be changed at
Camera setup menu. There are three different colors, white, gray, and black for a user to
choose.
Chapter 6-2-7. Mode
Mode refers to camera channel display mode. There are two modes available. Mode 1 aligns
the last row’s camera names at the bottom of the camera channels. Mode 2 aligns the last
row’s camera names at the top of the camera channels. This feature provides the flexibility
which allows PDR-2160’s output to fit different analog monitor’s output.
Mode 1:
Mode 2:
PDR-2160 Instruction Manual
26
