User Manual
19
Chapter 6-5-6. Alarm Time
Motion alarms and external alarm inputs can trigger the buzzer alarm. Buzzer time is
adjustable from 5 to 100sec. Press Left or Right button on Buzzer Time to adjust the time
setting.
Chapter 6-5-7. Buzzer
In case, the warning buzzer requires to be turned off. A user can disable the buzzer under
System->Buzzer Enable menu item.
Chapter 6-5-8. Button Sound
To enable or disable button sound, please set button sound option.
Chapter 6-6. System Setup
The DVR system related settings such as date/time, HDD, restoring manufacturing default,
video format, DVR/RS-485 ID, language, password authentication, and firmware update can
be configured from system menu. To setup above features, please follow the following
instructions:
Chapter 6-6-1. Date/Time
The DVR has built-in timer to record time information. One can choose different time format
or disable the timer displayed on monitor.
Daylight Saving Time
The DVR provides Daylight Saving Time (DST) feature. This feature allows the DVR to
change timer system based on Daylight Saving Time table.
Chapter 6-6-2. HDD Information
HDD INFO shows the following information:
1.
Model number—The model number of the hard disk drive
2.
Size—The capacity of the hard disk drive
3.
Approximate recording hour—recording hours based on the HDD(s)
4.
Approximate recording days—recording days based on the HDD(s)
5.
Average frame size—Average picture size
HDD Format
To format HDDs, please select HDD Format menu item. Password is required
for preventing
unauthorized access. A warning message also gets prompted for formatting verification.
Please be alerted to this operation. It may erase not only event list data but also recorded
video data. Press ENTER button at HDD Format menu to format the hard disk drives.
Formatting hard disk drives may take several seconds based on the number of lists recorded.
Warning:
Highly recommend to re-format HDD, if the timer has been set and the HDD has
recorded video data.
