www.liko.com
Assembly Instruction
44
5. 275.1
Plastic Housing
© Copyright Liko AB
www.liko.com
Tools required:
Plast. housing G7-77 grey
Bandmagasin G7-77 grå
Assembly Instruction
Monteringsanvisning
Prod no: 20090060
3SE630267-01
2007-02-09
5.275.1
1. Pull the strap all the way out.
10. Roll the strap up until the red
mark reaches the plastic housing.
4. Use the pin to lock the axle
where the strap was mounted.
3. Do not let go of the spring-
loaded wheel, since the tension
will release.
2. Hold the springloaded wheel
and release the strap by removing
the pin.
5. Push the emergency lowering
handle down and pull the strap
away.
6. Pull the rest of the strap out and
remove the plastic housing.
7. Mount the new strap through
the plastic housing with the red
mark towards the plastic housing
and then as shown above.
8. Remove the pin. Do not let go
of the springloaded wheel, since the
tension will release. Mount the strap
through the slot in the axle and the
same way back.
Note!
The axle
has two different sides. Place the
pin as shown to lock the strap.
9. Push the plastic housing
on to the strap joint.
13 mm
