www.liko.com
Assembly Instruction
36
5. 251.1
Limit switch G7-77
© Copyright Liko AB
www.liko.com
Tools required:
5.251.1
4. Remove the cables from the
electronic card.
1.
5. Loosen the electronic card by remo-
ving the screws, see picture 6,
pull out the card. Loosen the screws
holding the cables.
6. Assemble the new card. Make
sure that the spacers (A) is between
the mast and the card. Connect the
cables.
Make sure that the new card works
by operating the actuator down at
the same time as you press the Limit
switch on the electronic card.
1. Remove cable from controlbox.
2. Push the plastic cover upwards.
3. Remove the cover from the mast.
Cable to actuator
Cable to controlbox
Note: Some of the poles (+/ -) can be changed in older versions.
The colors of the cable can be different than the picture shows.
Always test the functionality after assembly.
brown, blue, red, black
Limit switch G7/G77
Ändlägesbrytare G7/G77
Assembly Instruction
Monteringsanvisning
Prod no: 20090052
3SE640240-02
2007-02-13
A
