Lika XAC80 PB, Руководство пользователя, Страница: 35 / 60

XAC80 Profibus-DP
®
Class 2(+VEL) example
After having set new parameter values, press the
OK
button to close
the
Properties – DP slave
window and then press the
Download
button (see the icon on the left) in the toolbar of the
HW Config
window to
download the set parameters.
6.2 Reading the diagnostic information
The system implements 16-byte diagnostic messages, for any further
information refer to the “7.7 DDLM_Slave_Diag” section on page 52.
Before entering the diagnostic page, it is necessary to connect to the
unit (enter online status). To do this, select
Station\Open online
in
the
HW Config
window or click the
Online<->Offline
button (see
the icon on the left). Then select
PLC\Module information…
to enter the
Module information
window. Finally open the
DP Slave Diagnostics
page.
MAN XAC80 PB E 1.0.odt 6 - Quick reference 35 of 60