LightwaveRF JSJSLW934, Инструкция по эксплуатации

Страница: 23 / 25

Q.
Does the Electric Radiator Switch have a ‘standby’ power comsumption?
A.
The Switch has a standby power consumption of approx. 0.5W. This is
because the in-built radio receiver requires power in order to receive
commands. This rate is low & well within government energy guidelines.
Q.
Can I link more than one Electric Switch to a Thermostat or Remote?
A.
Yes. Please refer to www.lightwaverf.com for current device limits.
Q.
Is it legal for me to install a LightwaveRF Electric Switch myself?
A.
Yes, LightwaveRF products are fully legal to install in your own home.
Q.
Is it possible to overload the Switch?
A.
13A max. loading (3000W) applies.
Q.
Do i need to use a Thermostat with every Electric Switch installed?
A.
No. The Electric Switch has in-built temperature sensing; however, using a
Room Thermostat will slightly improve the accuracy of the temperature
monitored, as it is removed from the heat of the radiator.
Q.
Should I use a Room or Home Thermostat with the Electric Switch?
A.
It is possible to use either of the these Thermostats to control more than one
Electric Switch in the same Room or ‘heating zone’. The Room Thermostat, however, is
the simplest and most attractive way to do this as it is purpose designed for the task.
FAQs