Linking multiple Electric Switches in one ‘heating zone’ (room)
If you have a large room or area with more than one radiator, you may want
to link the Electric Switches to become part of the same ‘heating zone’ on the
App and work together.
You can do this by, firstly, linking one Switch to Lightwave Link and App, and
then linking it to the next Switch to form a ‘daisy-chain’. Alternatively, you can
link a Room / Home Thermostat to the App, then to a Switch, and finally link
the Switches together. The Thermostat will take commands from the App and
relay them to the linked Switches in its ‘heating zone’.
In some cases, you may also want to link a Heating Remote or Magnetic
Trigger to more than one Electric Radiator Switch in the same room or
‘heating zone’. This will cause all radiators to be controlled by the same
device. This can be achieved in the same way: link one Electric Switch to the
Remote or Trigger, and then link that Switch to the next. A single Heating
Remote or Magnetic Trigger can also be linked to multiple Switches by linking
it to a Thermostat that, in turn, controls the Electric Switches in that room.
IMPORTANT:
LightwaveRF Electric Switches can link to a limited number of
heating devices. If this limit is exceeded and an extra device linked, the link to
the former device will be overwritten. More devices can be added by linking
them to the Lightwave Link and App. It is always recommended to use the
Lightwave Link if anything more than a basic setup is desired.
Heating System Setup
Содержание JSJSLW934
Страница 2: ......
