Understanding the Indicator LEDs
Basic Operation
Device Setup
This section will show you how to setup the basic functions of the Electric
Radiator Switch to allow you to use it manually or with a Heating Remote /
Magnetic Trigger. If you link the Switch to Room or Home Thermostat, or with the
Lightwave Link, then the Switch will take its instructions from these devices. This
means that the Switch will automatically abide by the temperatures and
schedules that you set from them.
The following section will show you how to link the Electric Radiator Switch to a
Thermostat, and other LightwaveRF Heating devices, to integrate it into your
heating system.
It is always recommended to use the Electric Radiator Switch
with the Lightwave Link if anything more than a basic setup is desired.
Steady Green ‘On’:
Radiator is on
Steady Red ‘Off’:
Radiator is off
Alternating On/Off (longer on LED):
Linking mode
Alternating Off/On (Longer off LED):
Unlinking mode
Содержание JSJSLW934
Страница 2: ......
