LightwaveRF JSJSLW934, Инструкция по эксплуатации

Страница: 15 / 25

Linking the TRV to other LightwaveRF heating devices
If you intend to use a LightwaveRF Heating Remote,
Home / Room Thermostat or Magnetic Trigger to control
the Switch directly then you will need to ‘link’ them. The
Switch can be linked to other LightwaveRF heating
devices using the following method.
1.
Press and release the ‘Linking’ button on the Electric
Switch (the on and off LEDs will flash alternately).
2.
Press the Linking button on the heating device you
wish to link. The ‘on’ LED should flash to indicate a
successful link.
To unlink a heating device from the Switch, press and release
the Linking button and then press the Standby button. This
activates ‘unlinking’ mode. Press the Linking button on the
heating device you wish to unlink. The ‘off’ LED should flash
to indicate that the devices have been unlinked.
To completely clear the memory of the Switch, press and
release the Linking button. Then hold the Linking button
until the LEDs flash rapidly. Finally, press and release the
Linking button once more. The Off LED should then flash.
Heating System Setup