UMX4x4-Pro
User’s Manual
Section
7
.
Programmers
reference
Page 93 / 129
7.8.3. Switch diagonal
Description
: This command switches all video and/or audio outputs to the same numbered
inputs. Output 1 will be switched to the Input 1, Output 2 to Input 2, etc.
Format
Example
Command {<in>@D
●<A/V/AV>
}
→ {1@d av}
Response (ALL
V
●
<out²>
●
<out²>
●
<out²>
●
<out²>)CrLf
(ALL
A●
<out²>
●
<out²>
●
<out²>
●
<out²>)CrLf
←
←
(ALLV 01 02 03 04)CrLf
(ALLA 01 02 03 04)CrLf
Legend:
Switch one input to one output
Explanation:
The example shows how to connect audio and video outputs to the same
numbered inputs. The response contains all the connections, if both layers
are selected the response is two messages.
7.8.4. View connection on output
Description
: This command shows the video connection status of an output.
Format
Example
Command {?<out>}
→ {?2}
Response
(O<out²>●I<in²>)CrLf
← (O02●I03)CrLf
Explanation:
The example shows that video output 2 is connected to input 3
Info:
This command kept for legacy purposes; to get information about all layers, please use the
multilayer command:
View connection on all outputs
Info:
The response shows connections only for the video layer
.
7.8.5. View connection on all outputs
Description
: This command displays all connections on a single or multiple layers.
Format
Example
Command {VC
●<A/V/AV>
}
→ {vc●av}
Response
(ALLV●<in²>●<in²>●<in²>●<in²>)CrLf
(ALLA●<in²>●<in²>●<in²>●<in²>)
CrLf
← (ALLV●02●02●02●03)CrLf
(ALLA●02●02●02●04)CrLf
Legend:
Switch one input to one output
<in²>
Contains mute & lock state of the output:
M = muted
L = locked
U = muted & locked.
and contains the number of the selected input
(02 = connected to input no. 2)
(M02 = muted output, selected input: no. 2)
(L02 = locked to input: no. 2)
(U02 = muted & locked output, selected input: no. 2)
Explanation:
The response contains all the connections, if both channels are selected the
response is two messages.
The example shows that output 1,2,3 Audio & Video are connected to input 2
A&V; output 4 video is connected to input 3 and output 4 audio is connected
to input 4.
(ALLV●M02●U02●L02●03) response means video output 1 is muted, video
output 2 is muted & locked and video output 3 is locked to input 2.
Info:
If the command is used without the
<A/V/AV> parameter, the response shows only the
video layer connections.
