UMX4x4-Pro
User’s Manual
Section
6
.
Web
control
– Using built-in website
Page 69 / 129
Step 2.
Press Load Preset button. Now the preset is loaded.
Step 3.
The new I/O configuration is displayed on the matrix switching area.
Save preset
Step 1.
Make the desired crosspoint connections on the matrix switching area.
Step 2.
Select the preset memory (Preset1...Preset32) where you want to save your current
crosspoint connections.
Step 3.
Press SAVE PRESET button.
Step 4.
A confirmation message comes up. Click YES to save the current crosspoint
connections to the selected preset memory. The preset is stored.
6.3.9. Input parameter settings
By clicking on an input label a dialog window appears showing the parameters for the
corresponding input.
Figure 6-2. Input settings for digital signal
Scope of changes
There are two options to apply changes. To set the scope of the changed settings, select
the desired option in the general settings box.
Apply changes to current input:
this option means the modified parameters are applied
only to the currently selected port.
Apply changes to all inputs:
this option means that the modified parameters are applied
to all input ports.
Info:
When opening this window again, the scope selection will be set to “Current Input”
regardless of the active selection at the time of closing. It is to avoid making changes to all
inputs by mistake.
