Modular Extender family
Quick Start Guide
Section
5
. Web control
– Using the Built-in website
Page 11 / 15
5.4.2.2. Audio crosspoint
In the main menu left click on the
Crosspoint
label then left click on
Audio
label the
audio crosspoint appears. The inputs are at the top row and the outputs are at the right
column. The number of the inputs and the outputs depends on the number, the direction
and the mode settings of the audio modules.
OPTx extenders support two audio groups the
Main audio group
and the
S/Pdif audio
group
. These groups are independent from
each other. In this case there are forbidden
crosspoint connections.
The link can support four audio layers. The
Embedded audio
(from Tx to Rx) and the
Return AUX
(from Rx to Tx) belongs to the
Main audio group. The
Forward Audio
(from Tx to Rx) and
Return Audio
(from Rx to
Tx) belongs to the S/PDIF audio group.
At the transmitter
side the
Embedded
audio
and
the
Forward
Audio
appears
as
an
output, the
Return
Audio
and
the
Return
AUX
appears
as
an
input.
At
the
receiver side the
direction
is
the
opposite.
The input and output settings can be accessed through module and port properties.
Every port is represented with a connector icon, while the modules are represented with a
colored bar. Some modules have multiple ports so the module settings may affect which
ports can be used. Ports settings can be accessed through the
Port property icon
. The
module settings can be accessed through the
Module property
bar.
