Lightware HDMI-TPS-RX220AK, Руководство пользователя, Страница: 44 / 118

5. Software Control - Lightware Device Controller HDMI-TPS-RX220AK – User's Manual 44
Applied firmware package: v1.4.0 | LDC software: v2.4.0b3
Description Function
ID Code number.
Name You can give an unique name for the desired code.
Fingerprint (hash) Fingerprint code in pronto hexa format.
Detected Indicator gives feedback about the given IR code is detected currently.
Repeat timeout (ms) You can set a timeout to avoid the involuntary code recurrence.
Actions
Action buttons for the desired IR code:
Save
: saving the fingerprint.
Cancel
: canceling the fingerprint.
Learn
: learning the detected IR code.
Detected IR fingerprints
You can check the detected IR codes in this panel. Pushing
Clear
button
deleting all current fingerprints and switch on or off the automatic
scrolling with the
Autoscroll
pipe.
20 fingerprints can be stored in the device at the same time. Each of them can be ordered to an action in
Event Manager. For more details about events see Event Manager section.
Learning IR Codes
Step 1.
Connect the IR detector unit to the IR IN port of the receiver.
Step 2.
Click on the
Learn
button.
Step 3.
Turn the remote controller to the IR detector. A pop-up window appears in LDC - press your remote
button to learn.
Step 4.
Once the code is received, a new window pops up in LDC - learning completed. Click
OK
to continue.
Step 5.
Optionally type a unique name for the code in the
Name
text box. The default name is code#, e.g.
code0.
Ports Section
The user can set the name and command injection port to each sources and destinations. For more details
about IR interface see the IR Interface section.
The following settings are also available:
▪
Port name;
▪
Enable / disable the port;
▪
Port number;
▪
Enable / disable command injection;
▪
Message sending function (little-endian pronto hex code). For more details see the next section;
▪
Reloading Factory Default Settings .
Infra tab - Ports window
Sending pronto hex codes (Little-endian format)
Copy the raw, little endian-format IR code into the
Send Pronto Hex
entry field and click the
Send
button.
The maximum length of the code can be 765 characters (765 bytes). For more details about the accepted IR
code formats, see Sending Pronto Hex Codes in Little-endian Format via IR Port section.
This entry field does not store the code. The code can be saved into the action in the event manager with
the following parameters:
Category:
Infra;
Expression:
Send pronto hex
; Port:
D1;
Pronto hex:
<custom_code>
In the Event Manager, the maximum length of the code can be 184 characters (184 bytes).
INFO: Sending bigger endian-format code is available with LW3 protocol command, see Sending Pronto
Hex Codes in Big-endian Format via IR Port section.
Clear all IR codes
Clicking on the button results deleting all stored IR fingerprints.
   