5.SoftwareControl-LightwareDeviceController
HDMI-TPS-TX200series–User'sManual
45
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
5.7.2.
Frame Detector
Theportscanshowdetailedinformationaboutthesignallikefullsizeandactivevideoresolution.This
featureisagoodtroubleshooterifcompatibilityproblemsoccurduringsysteminstallation.Toaccessthis
function, open the port properties window and click on
Frame detector
button.
#framedetector
Frame detector window
Lightware’sFrameDetectorfunctionworkslikeasignalanalyzerandmakespossibletodeterminetheexact
videoformatthatispresentontheport,thushelpstoidentifymanyproblems.E.g.actualtimingparameters
may differ from the expected and this may cause some displays to drop the picture.
FrameDetectormeasuresdetailedtimingsonthevideosignalsjustlikeabuilt-inoscilloscope,butitis
muchmoreeasytouse.Actualdisplayareashowstheactivevideosize(lightgrey).Darkgreyareaofthe
fullframeistheblankingintervalwhichcancontaintheinfoframesandembeddedaudiodataforHDMI
signals.ShownvaluesaremeasuredactuallyonthesignalandnotretrievedonlyfromtheHDMIinfoframes.
5.7.3.
No Sync Screen (Test Pattern)
No sync screen options in the port properties window of TPS output
TheNosyncscreenfeaturegeneratesanimagewhichcanbedisplayedwhenthereisnoincomingsignalon
theport.ThefollowingsettingscanbesetfortheTestPatternfunction:
Mode
▪
On
:thevideooutputportalwaystransmitsthetestpattern.
▪
No signal
:thevideooutputporttransmitsthetestpatternifthereisnoincomingsignalontheselected
input port.
▪
Off
: the test pattern function is disabled, the video output port transmits the video signal of the
selected input port.
Clock Source
▪
480p
▪
576p
▪
Originalvideosignal
Pattern
▪
Red/Green/Blue/Black/White/Ramp/Chess/Bar/Cycle
ATTENTION!
However the mode of the Test pattern can be set at each port separately, the clock source
andthepatternsettingsarecommon.
