Lightware DP-TPS-TX210 Скачать руководство пользователя

Страница: 138 / 159

8.FirmwareUpdate

HDMI-TPS-TX200series–User'sManual

138

Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2

r522

[2021-05-12 11:56:35.668] [ INFO] [ 192.168.1.12] - [tps_family_ps171.bin]'s firmware version updated in FVS

EEPROM.

[2021-05-12 11:56:42.224] [ INFO] [ 192.168.1.12] - Setting system information...

[2021-05-12 11:56:48.780] [ INFO] [ 192.168.1.12] - Starting application...

[2021-05-12 11:58:39.139] [ INFO] [ 192.168.1.12] - Waiting for VS100...

[2021-05-12 11:58:40.843] [ INFO] [ 192.168.1.12] - Restoring device settings from the following backup file:

c:\My_backup\backup_91540065_00002263_2021-05-12_11-54-56_converted.lw3 ...

[2021-05-12 11:58:47.038] [ INFO] [ 192.168.1.12] - Device settings have been restored

[2021-05-12 11:58:47.066] [ INFO] [ 192.168.1.12] - Resetting device...

[2021-05-12 11:58:52.082] [ INFO] [ 192.168.1.12] - Done

All 1 update(s) finished successfully.

Example 3

Thefollowingoptionsapplied:

▪

Cleartextloginpasswordisapplied

▪

Custom backup folder is set

▪

Currentconfigurationissaved

▪

Firmware is

not updated

but the process and the connection is

tested

C:\Program Files (x86)\Lightware\Lightware Device Updater V2>LightwareDeviceUpdaterV2_CLI.cmd update --test --ip

192.168.1.12 --package c:\Firmwares\tps-tx200_v1.3.2b3.lfp2 --backupFolder c:\My_backup --clearTextLoginPw qwer1234

C:\Program Files (x86)\Lightware\Lightware Device Updater V2>lib\jre\bin\java.exe -jar lib\ldu2.jar update --test

--ip 192.168.1.12 --package c:\Firmwares\tps-tx200_v1.3.2b3.lfp2 --backupFolder c:\My_backup --clearTextLoginPw

qwer1234

[2021-05-12 12:02:23.179] [ INFO] [ main] - Device IPs: [192.168.1.12]

[2021-05-12 12:02:25.615] [ WARN] [ pool-2-thread-1] - NetworkMask property is not available. Cannot determine

whether the device is on the same network or not.

[2021-05-12 12:02:25.723] [ WARN] [ pool-2-thread-1] - Bonjour device builder error messages: [object Array]

[2021-05-12 12:02:25.771] [ INFO] [ main] - All the selected devices are accessible over the network.

[2021-05-12 12:02:25.968] [ INFO] [ main] - All the selected devices are compatible with the specified

package.

[2021-05-12 12:02:26.396] [ INFO] [ 192.168.1.12] - PASSED - Test #01 - Communication over LW3

[2021-05-12 12:02:26.457] [ INFO] [ 192.168.1.12] - PASSED - Test #02 - Cleartext login - PW is correct

[2021-05-12 12:02:26.501] [ INFO] [ 192.168.1.12] - Creating backup of device settings...

[2021-05-12 12:02:29.952] [ INFO] [ 192.168.1.12] - Backup HTTP enable properties

[2021-05-12 12:02:32.507] [ INFO] [ 192.168.1.12] - HTTP and HTTP post have got enabled on port 80

[2021-05-12 12:02:32.732] [ INFO] [ 192.168.1.12] - No miniweb file is found on the device.

[2021-05-12 12:02:35.266] [ INFO] [ 192.168.1.12] - HTTP and HTTP post properties have got restored on port 80

[2021-05-12 12:02:35.268] [ INFO] [ 192.168.1.12] - PASSED - Test #03 - Configuration and/or device preset

backup created

[2021-05-12 12:02:35.289] [ INFO] [ 192.168.1.12] - Switching device into bootload mode...

[2021-05-12 12:02:36.996] [ INFO] [ 192.168.1.12] - PASSED - Test #04 - Switch device into bootloader mode

[2021-05-12 12:02:54.316] [ INFO] [ 192.168.1.12] - PASSED - Test #05 - Communication with bootloader

[2021-05-12 12:02:54.330] [ INFO] [ 192.168.1.12] - Gathering UID information from device...

[2021-05-12 12:02:54.832] [ INFO] [ 192.168.1.12] - PASSED - Test #06 - TFTP file transfer

[2021-05-12 12:03:12.030] [ INFO] [ 192.168.1.12] - PASSED - Test #07 - Start application FW

[2021-05-12 12:03:12.876] [ INFO] [ 192.168.1.12] - Done

All 1 update(s) finished successfully.

8.7.9.

Exit Codes

Thereisareturnvalueinallcases,whenacommandrunisfinished.Currently,threecodesaredefined:

Code

Displayed text

Description

N/A

The update performed successfully

Updateerror(ErrorCode:1)

Theerrorhappenedduringtheupdate

CLIerror(ErrorCode:2

Theerrorhappenedbeforestartingtheupdate

The error line contains further information about the error.

Querying the Exit Code under Windows

c:\Program Files (x86)\Lightware\Lightware Device Updater V2\echo %errorlevel%

Querying the Exit Code under Linux

echo $?

Soifthisvalueisqueriedaftertheupdateanditis0,theupdateperformedsuccessfully.

8.8.

If the Update is not successful

▪

Restarttheprocessandtrytheupdateagain.

▪

Ifthedevicecannotbeswitchedtobootload(firmwareupdate)mode,youcandothatmanuallyas

writtenintheUser'smanualofthedevice.Pleasenotethatbackupandrestorecannotbeperformed

in this case.

▪

Ifthebackupcannotbecreatedforsomereason,youwillgetamessagetocontinuetheprocess

without backup or stop the update. A root cause can be that the desired device is already in bootload

(firmwareupdate)mode,thus,thenormaloperationmodeissuspendedandbackupcannotbemade.

▪

If an update is not successful, the

Export log

button becomes red. If you press the button, you can

downloadthelogfileasaZIPpackagewhichcanbesenttoLightwareSupportifneeded.Thelogfiles

containusefulinformationaboutthecircumstancestofindtherootcause.

#bootload



 



Содержание DP-TPS-TX210
































































































































































Результаты поиска

Содержание DP-TPS-TX210

Отзывы:

Похожие инструкции для DP-TPS-TX210

Бренды по названию

Популярные бренды

Lightware DP-TPS-TX210, Руководство пользователя

Результаты поиска

Содержание DP-TPS-TX210

Отзывы:

Похожие инструкции для DP-TPS-TX210

Бренды по названию

Популярные бренды