STANDARD REGISTRATION
MEDIA CONNECTOR REGISTRATION (OTHER REGISTERED COMPONENTS IN PLACE)
(particularly valuable when Topcat is mounted in the ceiling or on the wall)
1.
If replacing a Media Connector, make sure the malfunctioning unit is
unplugged.
2.
Plug in the new Media Connector. The blue power light will turn on.
3.
Locate the registration button on the back panel marked “REGISTER”
7.
After several seconds, the #1 light on the Topcat will turn solid.
The LINK light on front of the Media Connector will begin blinking,
then turn solid.
8.
The registration is complete. You can now plug any audio source
into the Media Connector to verify there is audio.
9.
Place system ID number (located in back of Topcat User Manual)
on the new Media Connector.
4.
Use another registered functional component (existing Flexmike or
Sharemike) to trigger the registration function in Topcat.
5.
Using a paperclip,
press and hold the registration button
for 3 seconds
inside the registered Flexmike.
6.
Briefly
press the registration button on the Media Connector. The REGISTER light will begin blinking.
NOTE: if at any point, the Topcat or Media Connector lights begin
blinking rapidly. that indicates registration error. Unplug the new
Media Connector, then repeat steps 4-8.
Blinking lights
Registration
Button
REGISTER
AUDIO IN
MIN
MAX
AUDIO
(ALD) OUT
MIN
MAX
ON/OFF
DC INPUT
16V/2.0A
1
4
3
2
2
1
AUDIO IN
AUDIO OUT
REGISTER
USB POWER
5V/1.5A
TONE
TREBLE
BASS
Registration
Button
AUDIO IN
MICROPHONE
AUDIO OUT
POWER
MIN
LINK
MAX
MIN
MAX
MIN
MAX
For users adding a Media Connector or replacing a lost or malfunctioning Media Connector.
Blinking lights
AUDIO IN
MICROPHONE
AUDIO OUT
POWER
MIN
LINK
MAX
MIN
MAX
MIN
MAX
