10
TROUBLE SHOOTING
1.
If the power indicator is off and the laser doesn't work, please check the power supply and the input.
2.
In Stand-Alone operation, if the power supply indicator is ON and sound active indicator is OFF, but the
laser doesn't work.
A.
The sound may be too small and cannot activate the laser running, please increase the music
volume or increase sound sensitivity on rear panel.
B.
Please check if unit has been set up in slave mode, or DMX mode.
3.
In Master-Slave operation, slave units don't running, please check as below.
A.
Make sure there's only one master in the chain, and the others are set in slave mode.
B.
Make sure to use a good quality power cable and XLR connector.
4.
In DMX operation, the unit can’t be controlled by the DMX console, but the DMX signal indicator is
flashing, please make sure the DMX console and unit have the same channel.
After trying the above solution you still cannot sort out the problem, please contact your dealer or our
company for service
www.musicstore.com
CH8
Pattern
size
0~63
Choose pattern size, 0 is normal size, 1 is the smallest, 63 is the biggest
Zooming
64~127
Auto zooming (-) from slow to fast
128~191
Auto zooming (+) from slow to fast
192~255
Manual zooming (+/-) from slow to fast
CH9
Drawing
0~255
Auto drawing from slow to fast
CH10
Scanning
speed
0~127
Choose sanning speed from slow to fast
Display
dot
128~255
Choose the length of dot
CH11
Color
setting
0~24
Normal color
25~199
Choose every single color
200~224
Every single color changing one by one
225~255
All the colors together changing alternatively in one pattern
CH12
Color
change
speed
0~255
Adjust color changing speed from slow to fast
