9
Universal DMX Operation (DMX mode)
This mode allows you to use universal DMX-512 console to operate.
1.
Install the units in a suitable position.
2.
Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer
cable we suggest a terminator at the last fixture.
3.
Assign a DMX address to each the unit using dipswitches.
4.
Turn on all units. Use DMX console to control your units.
Instruction for DMX channels
CH1
LASER
OFF
0~41
LASER OFF
Auto
Activate
42~83
DMX mode, CH2~CH12 valid
84~125
Build-in cartoon graphics auto running mode
126~167
Build-in beam graphics auto running mode
Sound
Activate
168~209
Build-in beam graphics auto running mode
210~251
Build-in cartoon graphics auto running mode
252~255
DMX mode, CH2~CH12 valid
CH2
Pattern
select
0~255
Selecting built-in patterns
CH3
Rotation
0~127
Manual rotation
128~191
Auto counter-clockwise rotation (from slow to fast)
192~255
Auto clockwise rotation (from slow to fast)
CH4
X axis
rolling
0~127
Manual rolling
128~255
Auto rolling (from slow to fast)
CH5
Y axis
rolling
0~127
Manual rolling
128~255
Auto rolling (from slow to fast)
CH6
X axis
moving
0~127
Manual choose moving position
128~255
Auto moving (from slow to fast)
CH7
Y axis
moving
0~127
Manual choose moving position
128~255
Auto moving (from slow to fast)
DMX Signal
