Lighthouse REMOTE 3104P, Руководство по эксплуатации

Страница: 28 / 82

Lighthouse REMOTE 3104P, 5104P Operating Manual
3-10 248083336-1 Rev 3
Using the USB Port to connect to a PC
To connect the instrument to a computer using the USB port, make sure
that the driver has been installed first. Connecting the 3104P or 5104P
to the PC and applying power before the driver has been installed will
be problematic. Refer to the following:
Note:
Make sure the
USB driver has been
installed on the PC before
connecting and applying
power to the 3104P or
5104P.
1. Remove power from the instrument.
2. Connect one end of a standard "A to B" USB cable to the 3104P or
5104P (only one end will fit).
3. Connect the other end to any available USB port on the PC.
4. Apply power to the 3104P or 5104P.
5. Windows will recognize that a new hardware device has been
attached and will finalize the installation as needed. This is a
routine "registering" of components that should take only a
moment. An additional COM port will be added to the PC.
6. Identify the computer port that has been added to the PC by using
the "Properties" of My Computer and examining the COM ports.
USB ports are generally added to the bottom of the list and named
USB COM port ’x’. Refer to Figure 3-7 for screen examples
(Windows XP).
Figure 3-7 Example Device Manager Screens
7. Use LMS XChange or one of the LMS Express products to connect
to the instrument and retrieve data from it. Use the port assignment
determined above.
After port is added
Before port is added
Device Manager
Screen