Lighthouse REMOTE 3104P Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 82

background image

00

248083336-1 Rev 3

3-1

3

Getting Started

Initial
Inspection

The instrument is thoroughly inspected and tested at the factory and is
ready for use upon receipt.

When received, inspect the shipping carton for damage. If the carton is
damaged, notify the carrier and save the carton for carrier inspection.
Inspect the unit for broken parts, scratches, dents, or other damage.

If the carton is not damaged, keep it for reshipment when you return the
instrument for the annual factory calibration or a Return Merchandise
Authorization for repair. Replacements are available for purchase.

Shipping
Instructions

Should it become necessary to return the unit to the factory for any
reason, contact Lighthouse Customer Service or visit our website,
www.golighthouse.com/RMA, and obtain a Return Merchandise
Authorization (RMA) number. Reference this number on all shipping
documentation and purchase orders. After receipt of the RMA number,
follow the shipping instructions below:

WARNING:

If the instrument is
damaged during
shipment due to
inadequate user
packing, the warranty
may be voided and
may result in
additional costs being
charged to the
customer.

1. Use the original container, nozzle caps and packing materials

whenever possible. If your instrument contains a battery, remove it
before packing the instrument. If the battery needs to be shipped,
package it separately and refer to www.golighthouse.com/rma for
detailed instructions.

2. If the original container and packing materials are not available,

wrap the unit in "bubble pack", surround with shock-absorbent
material and place in a double-wall carton - the instrument should
not rattle around when the carton is vigorously shaken. If the
instrument is damaged during shipment due to inadequate user
packing, the warranty may be voided and all repairs required will
be at cost. You may contact Lighthouse to purchase a replacement
shipping container and nozzle caps.

3. Seal container or carton securely. Mark "FRAGILE" and enter the

Return Merchandise Authorization (RMA) number in any
unmarked corner.

4. Return to the address provided by your Lighthouse representative

or the RMA website.

«
...
17
18
19
20
21
...
»

Содержание REMOTE 3104P



















































































Отзывы:

Нет отзывов

Похожие инструкции для REMOTE 3104P

Бренд: Casio Страницы: 8

Бренд: Casio Страницы: 112

Бренд: daviteq Страницы: 14

Бренд: Clas Ohlson Страницы: 4

Бренд: Talaris Страницы: 72

Бренд: Datecs Страницы: 20

Бренд: AccuBANKER Страницы: 7

Бренд: ratiotec Страницы: 32

Бренд: Vega Absolute Страницы: 33

Бренд: BMC Страницы: 40

Бренд: Sharp Страницы: 242

Бренд: Sharp Страницы: 140

Бренд: Sharp Страницы: 25

Бренд: Sharp Страницы: 230

Бренд: Sharp Страницы: 16

Бренд: Sharp Страницы: 121

Бренд: Sharp Страницы: 100

Бренд: Sharp Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды