Lighthouse REMOTE 3104P, Руководство по эксплуатации

Страница: 23 / 82

Getting Started
248083336-1 Rev 3 3-5
Optional Analog Sensors
Each sensor is connected to the instrument using an RJ-12 cable. The
cable pinout is shown in Table 3-1.
Figure 3-4 Rear Connector Pin Assignments
Lighthouse sensors come complete with adapters and pre wired cables.
The Lighthouse Temperature/Relative Humidity sensor has both
functions wired to the same connector. Plug its connector into the port
labeled "1".
WARNING:
Wiring
the pins in reverse order
may harm the instrument
and/or the sensor and
may void their respective
warranties.
If you are wiring a cable to use with a sensor from another
manufacturer, the connectors on telephone cables are mirror images of
each other. For that reason, we have not included color coding in the
table. The figure below shows the pin numbering on the back of the
REMOTE - your cable must be wired accordingly.
Table 3-1 Analog Connector Pinout
Pin Number Function
1 5VDC
2 Analog #1 In
3 24VDC (VCC)
4 GND (tied to Pin 6)
5 Analog #2 In
6 GND