Lighthouse Remote 3014PN, Руководство по эксплуатации

Страница: 14 / 84

Lighthouse REMOTE-4PN Series Operating Manual
1-2 248083317-1 Rev 4
Electrostatic
Safety
Information
Electrostatic discharge (ESD) can damage or destroy electronic
components. Therefore, all service or maintenance work should be
done at a static-safe work station. A static-safe work station can be
created by doing the following:
WARNING:
Using a
wrist-strap without an
isolation resistor will
increase the severity of
an electrical shock.
• Use a grounded conductive table mat and resistor-isolated wrist-
strap combination.
Earth-ground all test instruments to prevent a buildup of static charge.
LAN-connect
Warning
WARNING:
Connect only Ethernet REMOTE-4PN Series
instruments to a standard Ethernet LAN (Local Area Network). An
RS485 MODBUS REMOTE-4PN may damage the instrument, LAN
hardware or both if its RJ45 port is connected to an Ethernet
network.
Failure to heed this warning will void the instrument warranty and
may void the associated warranties of any affected LAN
equipment.
Figure 1-2 is the warning label attached to the face of the REMOTE-
4PN Series:
Figure 1-2 Ethernet LAN Connect Notice