background image

00

248083201-1 Rev 6

A-1

A

Limited Warranty

Limitation Of Warranties: 

A.

Lighthouse Worldwide Solutions (LWS) warrants that all 
equipment shall be free from defects in material and 
workmanship under normal use for a period of two years from 
date of shipment to Buyer except that LWS does not warrant that 
operation of the software will be completely uninterrupted or 
error free or that all program errors will be corrected. Buyer shall 
be responsible for determining that the equipment is suitable for 
Buyer’s use and that such use complies with any applicable 
local, state, or federal law.  Provided that Buyer notifies LWS in 
writing of any claimed defect in the equipment immediately 
upon discovery and any such equipment is returned to the 
original shipping point, transportation charges prepaid, within 
two years from date of shipment to Buyer and upon examination 
LWS determines to its satisfaction that such equipment is 
defective in material or workmanship, i.e. contains a defect 
arising out of the manufacture of the equipment and not a defect 
caused by other circumstances, including, but not limited to 
accident, misuse, unforeseeable use, neglect, alteration, 
improper installation, improper adjustment, improper repair, or 
improper testing, LWS shall, at its option, repair or replace the 
equipment, shipment to Buyer prepaid. LWS shall have 
reasonable time to make such repairs or to replace such 
equipment. Any repair or replacement of equipment shall not 
extend the period of warranty. If the Instrument is modified or in 
any way altered without the explicit written consent of LWS then 
the warranty is null and void. This warranty is limited to a period 
of two years, except as noted below, without regard to whether 
any claimed defects were discoverable or latent on the date of 
shipment. The length of warranty for pumps in hand held particle 
counters is one (1) year. Batteries and accessories with all 
products are warranted for one (1) year. Fuses and purge filters 
carry no warranty. If a third party battery is used in the product, 
the product warranty is null and void. If the battery is charged by 
a third party battery charger the battery warranty is null and void. 

B.

If Buyer shall fail to pay when due any portion of the purchase 
price or any other payment required from Buyer to LWS under 
this contract or otherwise, all warranties and remedies granted 
under this Section may, at LWS’s option, be terminated.

C.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN 
LIEU OF ALL OTHER REPRESENTATIONS, WARRANTIES 
AND COVENANTS, EXPRESS OR IMPLIED WITH 
RESPECT TO THE EQUIPMENT AND ANY DEFECTS 
THEREIN OF ANY NATURE WHATEVER, INCLUDING 
AND WITHOUT LIMITATION WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. LWS SHALL NOT BE LIABLE FOR, AND 
BUYER ASSUMES ALL RISK OF, ANY ADVICE OR 
FAILURE TO PROVIDE ADVICE BY LWS TO BUYER 
REGARDING THE EQUIPMENT OR BUYERS USE OF THE 
SAME. UNDER NO CIRCUMSTANCES SHALL LWS BE 
LIABLE TO BUYER UNDER ANY TORT, NEGLIGENCE, 

STRICT LIABILITY, OR PRODUCT LIABILITY CLAIM 
AND BUYER AGREES TO WAIVE SUCH CLAIMS. LWS’s 
SOLE AND EXCLUSIVE LIABILITY AND BUYERS SOLE 
AND EXCLUSIVE REMEDY, FOR ANY 
NONCONFORMITY OR DEFECT IN THE PRODUCTS OR 
ANYTHING DONE IN CONNECTION WITH THIS 
CONTRACT, IN TORT, (INCLUDING NEGLIGENCE), 
CONTRACT, OR OTHERWISE, SHALL BE AS SET FORTH 
IN THE SUBSECTION A HEREOF AS LIMITED BY 
SUBSECTION B HEREOF. THIS EXCLUSIVE REMEDY 
SHALL NOT HAVE FAILED OF ITS ESSENTIAL PURPOSE 
(AS THAT TERM IS USED IN THE UNIFORM 
COMMERCIAL CODE) PROVIDED THAT THE SELLER 
REMAINS WILLING TO REPAIR OR REPLACE 
DEFECTIVE EQUIPMENT (AS DEFINED IN SUBSECTION 
A) WITH A COMMERCIALLY REASONABLE TIME 
AFTER RECEIVING SUCH EQUIPMENT. BUYER 
SPECIFICALLY ACKNOWLEDGES THAT SELLER’S 
PRICE FOR THE EQUIPMENT IS BASED UPON THE 
LIMITATIONS OF LWS’S LIABILITY AS SET FORTH IN 
THIS CONTRACT. 

Warranty Of Repairs After 
Initial Two (2) Year Warranty: 

A.

Upon expiration of the initial two-year warranty, all parts and 
repairs completed by an authorized Lighthouse repair technician 
are subject to a six (6) month warranty.  

B.

Other than the above, LWS makes no warranty of any kind, 
expressed or implied, except that the products manufactured and 
sold by LWS shall be free from defects in materials and 
workmanship and shall conform to LWS’s specifications; Buyer 
assumes all risk and liability resulting from use of the products 
whether used singly or in combination with other products. If 
instrument is modified or in any way altered without the explicit 
written consent of LWS, then the warranty is null and void.

C.

WARRANTY REPAIRS SHALL BE COMPLETED AT THE 
FACTORY, BY AN AUTHORIZED SERVICE LOCATION, 
BY AN AUTHORIZED SERVICE TECHNICIAN, OR ON 
SITE AT BUYER’S FACILITY BY A LIGHTHOUSE 
AUTHORIZED EMPLOYEE. BUYER PAYS FREIGHT TO 
FACTORY; SELLER WILL PAY STANDARD RETURN 
FREIGHT DURING THE WARRANTY PERIOD. BUYER 
MAY SELECT A FASTER METHOD OF SHIPMENT AT ITS 
OWN EXPENSE.

Содержание REMOTE 2 Series

























































Отзывы: