Liftmaterial F5021, Руководство пользователя

Страница: 27 / 66

Manual F5021B - Shaft selection
Intelligent magnetic sensors iMS45
Meanwhile, all above mentioned switches are integrated in one compact
sensor-system. Due to this the montage and adjustments are made really easy.
The iMS45 have up to 4 solenoid sensors, which are together with a
programm able analysis-electric can generate up to eight switching signals. For a complete shaft selection
one iMS45-POS is enough. Especially for machineroomless an additonal iMS45-SPD sensor will be
attached, which detect the speed and rotation of the driving wheel. This is displayed at the Drive monitor,
which is the display and analysis unit.
The sending of datas itself will be done via a serial conection without malfunction rate RS485-connection.
Assembly and function
Assembly
The sensor is in a stable aluminium housing, which is also available as IP54-version which is used in
firefighter lifts.
The solenoids are flat solenoids with 15mmx7mm of cross-section and a variable length. The solenoids are
installed at the button of the arrester rails.
Function
In the iMS45 are 4 solenoid sensors, which are measuring the strengh and polarity of the magnetic field.
An analysis unit detect the respective switching signals and send these serial to the cabine, respectively to
the drive (driving wheel) for controlling/ stearing. Additionally the iMS45-POS have an independent
transistor output for e.g. contacting a chanel of a security circuit.
different detections:
* Single magnet north
* Single magnet south
* Doubble magnet upper north/ lower south
* Doubble magnet upper south/ lower north
* Tripple magnet north in the middle
* Tripple magnet south in the middle
* Crossing direction
* Crossing speed
* North/south transition is detected exactly of each milimeter, mostlikely independent on the distace
sensor/ magnet
Page 23